CAPDIS-M mit Modbus

CAPDIS-M mit Modbus

Voltage transformer replacement for capacitive interfaces according to VDE 0682 T 415 or IEC 61243-5

Part-No.: 2500770

CAPDIS-M: Voltage monitoring module, pluggable to the U0 interface of a CAPDIS-Sx+... more
Product information "CAPDIS-M mit Modbus"

CAPDIS-M: Voltage monitoring module, pluggable to the U0 interface of a CAPDIS-Sx+

  • Calibration per phase by teach function
  • Voltage measurement 3-phase (switchable)
  • Under- and overvoltage monitoring
  • Under- and overfrequency monitoring
  • Interface to voltage converter or amplifier CAPDIS-4

 

 

Technical Data

Function

Measurement, display and threshold monitoring of voltage and frequency

Auxiliary power supply

From CAPDIS-S2+(R3), via system cable from the CAPDIS-4 or PCMC (each 24 ... 230 V AC/DC)

Measurement

Three-phase, displayed phase selectable via button

Accuracy CAPDIS-M/4

<= 3% v. M.-B. after matching by teach function

Calibration

Using teach function

Message

Threshold exceedance via LEDs of the CAPDIS-M and relays of the CAPDIS-4 or CAPDIS-S2+(R3)

Output

RS 485 for connection CAPDIS-4 or IKI-EDI-W, interface to CAPDIS-S2+(R3)

Under-/ Overvoltage Function

Threshold values adjustable in increments of 1%

Under-/ Overfrequency function

Threshold values adjustable in increments of 0.1 Hz

Switching delays

Adjustable 0 ... 99 s

Housing

Insert housing for CAPDIS-Sx+/PI-RR3; h x w x t = 50 x 115 x 30 mm

Part-No.

2500785 (default), 2500770 (with Modbus output, no connection to CAPDIS-4 possible)