CAPDIS-S1+ (R4.5)

CAPDIS-S1+ (R4.5)

Capacitive Voltage Detecting Systems

Item number: 2502145
The CAPDIS-S1+ R4.5 is an integrated voltage testing system for checking for absence of voltage... more
Product information "CAPDIS-S1+ (R4.5)"
The CAPDIS-S1+ R4.5 is an integrated voltage testing system for checking for absence of voltage in medium-voltage switchgears in accordance with IEC 62271-213:2021 (or IEC 61243-5) with integrated three-phase continuous indication.

Voltage Detecting Systems VDIS for medium voltage (1..52 kV)

Testing for absence of voltage in medium voltage switchgears according to IEC 61243-5 or IEC 62271-213 with integrated three-phase continuous display.

Maintenance-free due to self-monitoring

No periodic retesting required according to IEC 62271-213 and BGV A3, as the device permanently monitors the response threshold and indicates it with a three-stage voltage level display (half, full and outlined lightning arrow).

Complete insulation monitoring of the capacitive divider

Complete primary-side and secondary-side monitoring and display of the insulation status of the capacitive voltage divider. Adjustment possibility for smart grid applications Adjustment possibility and monitoring of the capacitive divider for the standard-compliant response of the voltage test system and further processing of the voltage signals by smart grid systems (e.g. CAPDIS-M, IKI-23, IKI-50, IKI-55, ...). Adjustable 6-stage capacitor switching module allows adjustment of the voltage divider and shows the correct setting in the display.

Integrated self-test function

No external test device is required to test for voltage freedom. Integrated function test by means of test button. Clear indication when primary voltage is present and not present. Optional conductor break detection and ground monitoring.

Integrated Y-interface

For further processing of the voltage signals via a smart grid system (e.g. IKI-50); connection via optional Y-cable.

Integrated three-phase measuring point

The device has a three-phase LRM measuring point. This serves as an interface for phase comparison and rotary field direction measurement (e.g. by means of universal tester type CAP-Phase).

No battery required

Voltage test as well as self-test without battery or auxiliary voltage. 
General data
Article number2502145
Product designationCAPDIS-S1+ R4.5, Capacitive Voltage Detecting Systems
StandardIEC 61243-5, IEC 62271-213
Required data for orderNominal voltage Un, size of coupling capacitor C1
Functions
Intrinsic safetyDevice is intrinsically safe
Maintenance testNo periodic inspections are necessary for this device.
Broken lead detectionAvailable
Display and HMI interfaces
Front displayLC-Display
ControlsSelf-test button
Dimensions and type of installation
Case height x width x depth48 x 96 x 37 mm
Cutout height x width45 x 92 mm
Norm cutout dimensionsDIN IEC 61554:2002-08
Installation typePanel mounting
Environmental conditions
Operating temperature-25°C ... 55°C
Storage temperature-30°C ... 75°C
Protection classIP54
Voltage level1..52 kV (Medium-voltage)
Rated frequency50 Hz, 60 Hz
Type of interfaceLRM
LifetimeMinimum 31 years (MTBF)
Voltage supply
Power supplyNo auxiliary power supply needed
BatteryNo battery required