Voltage converter, system cable 3m

Item number: 2500307
Voltage amplifier can be used as a voltage transformer substitute. Together with the CAPDIS-M,... more
Product information "CAPDIS-4"
Voltage amplifier can be used as a voltage transformer substitute. Together with the CAPDIS-M, the CAPDIS-4 can use the CAPDIS-Sx series devices as capacitive voltage sensors, generating e.g. 3 x 100 VAC to replace three inductive voltage transformers.

The CAPDIS-4o amplifier provides an output voltage of 3 x 100 or 110 VAC /sqrt (3) in conjunction with three ohmic coupling electrodes. The amplifier can therefore be used as a substitute for three inductive voltage transformers.- economical alternative to feeder voltage transformers
- minimal space requirement, no additional measuring compartment needed
- no disassembly required for surge voltage tests
- no risk of ferroresonance
- 3 current outputs 3 x 0 (4) ...  20 mA
- 4 voltage outputs 100 VAC, 0.5 VA per channel
- Incl. system cable 3 m to CAPDIS-M
Device data
Article number2500307
Product designationCAPDIS-4 Voltage Transducer | System Cable 3 m
Device data
Output power per channel0.5
Maximum output voltage100 V
Summation voltage
Accuracy class amplitude3
Accuracy class of phase angleApplies in each case depending on the used C2m module of the Capdis-Sx+:

 1,500 pF< C2m < 3,300pF:  Class 6P (±4°)   
C2m > 3. 300pF: Class 3P (±2°)

C2m > 15,000 pF  Class 6P (±4°)

C2m < 3. 300 pF Class 6P (±4°)   
C2m > 3,300pF: Class 3P (±2°)

1,500 pF< C2m < 3. 300pF:  Class 6P (±4°)   
C2m > 3,300pF: Class 3P (±2°)

Note: Capdis-Pi-HR is not suitable for use with Capdis-M.
Cut-off frequency fg2500 Hz
Maximum input voltage1.5 V
System cable3m
4..20 mA interface
Case height x width x depth130 x 175 x 49 mm
Installation typeC-Rail mounting
Operating conditions
Operating temperature-20°C ... 55°C
Storage temperature-25°C ... 70°C
Protection classIP40
Signaling outputs
Summation voltage
Signaling outputs
Auxiliary power supply24-240V AC/DC
Power consumption16 VA
Capacitor buffer
Signaling outputs
MountingDIN rail