CAPDIS-Sense

CAPDIS-Sense

Voltage sensor for retrofitting, 1-24 kV, for non-controlled end closures, for air-insulated switchgears

Item number: 2500409_H001
CAPDIS-Sense is used to retrofit a capacitive tap in air-insulated switchgears without having to... more
Product information "CAPDIS-Sense"
CAPDIS-Sense is used to retrofit a capacitive tap in air-insulated switchgears without having to intervene in the switchgear. The capacitive tap enables voltage testing via the integrated Voltage Detecting Systems VDIS of the CAPDIS series, as well as further fault direction detection with fault direction indicators of the IKI series.

Wide voltage range

Applicable at 6 ... 24 kV

Sensor for fault direction detection

In conjunction with fault direction detection devices of the IKI series and a CAPDIS, the sensor can be used for easy retrofitting of air-insulated systems.

Easy retrofit

The sensor can be installed in the switchgear without any structural intervention.

Increase personal safety

No longer necessary to perform the voltage absence test with open doors of air-insulated switchgears. With retrofitting of the sensor and a CAPDIS, the switchgear door remains closed during voltage absence testing. This increases the personal safety of the operating personnel.
Device data
Article number2500409_H001
Product designationCapacitive voltage sensor | Retrofit | Air-insulated switchgears
Dimensions
MountingScrew connection for shield connection of the coaxial cable
Operating conditions
Operating temperature-25°C ... 55°C
Storage temperature-30°C ... 75°C
Protection classIP41
Applicable at nominal frequency50 Hz, 60 Hz
Inner diameter52 mm
Rated voltage24 kV
Coupling capacitance C12 pF
MountingScrew connection for shield connection of the coaxial cable