OAS24 R2

OAS24 R2

Ohmic voltage sensor, 24 kV, 0.2 %, for NKT CB 24-630 M12, CB 36-1250 M16, Suedkabel SET24

Item number: 2045602_H001
Ohmic terminations offer a compact possibility for precise voltage measurement in transformer... more
Product information "OAS24 R2"
Ohmic terminations offer a compact possibility for precise voltage measurement in transformer stations. They are typically installed in connector sets and can then be used in combination with e.g. CAPDIS-4o as a voltage transformer replacement or with the IKI-50 for voltage measurement.

  • Mounting as a terminating piece in the plug set
  • Voltage measurement, for example, in conjunction with the control device for the transformer station Grid-Inspector IKI-50 or the voltage amplifier CAPDIS-4o.
  • Distribution of the signal to several evaluation devices possible: connection of up to five IKI-50 to one set of OAS possible
  • Secondary voltage 3.25 VAC
  • Suitable for new installations and retrofits
  • Pluggable BNC connector for secondary side

.

Variant

Operating voltage 24 kV, measured value deviation 0.2 %

Compatible connector sets

NKT CB 24-630 M12, CB 36-1250 M16, , Suedkabel SET24
Device data
Article number2045602_H001
Product designationOAS24 R2, 24 kV, 0.2 %, for NKT CB 24-630 M12, CB 36-1250 M16, , Suedkabel SET24
Rated voltage24 kV
Secondary voltage3.25 V
Divider ratio200 M / 32,5 k
MountingNKT CB 24-630 M12 for cable cross sections up to 300 mm² NKT CB 36-1250 M16 for cable cross sections up to 630 mm² at 24 kV, Suedkabel SET24