Capacitive Voltage Detecting Systems with Relay Contacts, with Partial Discharge Detection, for High Voltage

Item number: 2502134_H009
The CAPDIS-S2_HV (R5) is an integrated Voltage Detecting Systems for checking for absence of... more
Product information "CAPDIS-S2_HV (R5)"
The CAPDIS-S2_HV (R5) is an integrated Voltage Detecting Systems for checking for absence of voltage in high-voltage switchgear in accordance with IEC 62271-213:2021 (or IEC 61243-5) with integrated three-phase continuous indication and Signaling outputs. It also allows detection of partial discharges in the station and its surroundings.

Voltage Detecting Systems VDIS for High Voltage (52 - 480 kV)

Testing for absence of voltage in high voltage switchgear according to  IEC 61243-5 resp. IEC 62271-213 with integrated three-phase continuous display.

Partial discharge detection

Critical partial discharge levels are detected, shown on the display and output via the relay collective fault signal. The sensitivity of the PD detection is set or also deactivated via a DIP switch on the rear of the device. A socket behind the front flap is available for PD diagnostics.

Maintenance-free due to self-monitoring, fail-safe

No periodic retesting according to  IEC 61243-5 or IEC 62271-213 u. BGV A3 required, as the device permanently monitors the response threshold and displays it with a three-stage voltage level indicator (half, full and outlined lightning arrow).

Integrated self-test function

No external test device is required to test for absence of voltage. Integrated function test by means of test button, according to patent DE 103 04 396. Clear indication of primary voltage present and not present.

Relay outputs and LED displays

For remote monitoring of voltage states, two signal relays [changeover contacts] are integrated, which are operated with auxiliary voltage. The status of the relays is additionally indicated via LEDs in the front.

Integrated V-interface

For further processing of the voltage signals via a smart grid system (e.g. IKI-50, IKI-22) connection via optional Y-cable.

Integrated three-phase measuring point

The device has a three-phase LRM measuring point for phase comparison, rotating field direction measurement e.g. by means of CAP phase or connection of CAPDIS-M.

No battery required

Voltage test as well as self-test without battery or auxiliary voltage.
Device data
Article number2502134_H009
Product designationCAPDIS-S2_HV (R5) Capacitive Voltage Detecting Systems with relay contacts | with partial discharge detection| for high voltage
StandardIEC 61243-5, IEC 62271-213
Required data for orderRated operating voltage Un, coupling capacitance C1
Intrinsic safetyDevice is intrinsically safe
Maintenance testNo periodic inspections are necessary for this device
Broken lead detectionCan be activated/deactivated via DIP switches
Partial discharge detection
  • Device detects partial discharges
  • 4 sensitivity levels adjustable
  • Remote indication of partial discharge e.g. to IKI-23, IKI-50_1F R2, IKI-50_1F R2e or IKI-55 for partial discharge trend detection
Controls and display
Response time relay<= 0,2 s
Front displayMonochrome LC display and colored LEDs
ControlsSelf-test button
Dimensions and type of installation
Case height x width x depth48 x 96 x 37 mm
Cutout height x width45 x 92 mm
Norm cutout dimensionsDIN IEC 61554:2002-08
Installation typePanel mounting
Operating conditions
Operating temperature-25°C ... 55°C
Storage temperature-30°C ... 75°C
Protection classIP54
Voltage level53..480 kV (High-voltage)
Rated frequency50 Hz, 60 Hz
Type of interfaceLRM
LifetimeMinimum 22 years (MTBF)
Signaling outputs
Connection of connecting cablesBy means of flat plug sleeve 4.8 x 0.8 mm or system plug (order separately)
Switching capacity relay250 VAC, 5 A (resistive load) / 30 VDC, 5 A / 250 VDC 0.3 A (resistive load)
Voltage supply
Auxiliary power supply24 - 230 V AC/DC +-10%
Power supply24 - 230 V AC/DC +- 10%; Power input < 1 Watt
Power consumption< 1 W
Insulation voltage2 kV
BatteryNo battery required