Adapter Sx auf PI
Adapter switch, 1F to 2F, 0.2 m
Adapterweiche, 1F auf 2F, 0.4 m
Adapterweiche, 1F auf 2F, 1.5 m
To connect the Small-Signal Sensor-Adapter to IKI-55; 0.25 m
To connect the Small-Signal Sensor-Adapter to IKI-55; 1.5 m
To connect CAPDIS and IKI-LUM to IKI-55
To Connect CAPDIS, voltage sensors and IKI-LUM to IKI-55
Cutout for one device
Cutout for two devices
Bus connection between three IKIs, 3 x 60 cm, incl. termination resistor
Bus connection between two IKIs, 2 x 60 cm, incl. termination resistor
C2m = 470 pF | with ground line
C2m = 1.000 pF | System connector | with ground wire
C2m = 1.500 pF | System connector | with ground wire
C2m = 10 000 pF | with ground line
C2m = 10 000 pF, connector, with ground wire
C2m = 10 000 pF, control line pluggable, no ground wire
C2m = 10.000 pF | System connector | with ground wire
C2m = 100 pF | with ground wire
C2m = 100 pF | System connector | with ground wire
C2m = 100 pF, control line pluggable, no ground wire
C2m = 1000 pF | with ground line
C2m = 1000 pF, control line pluggable, no ground wire
C2m = 15 000 pF, control line pluggable, no ground wire
C2m = 15.000 pF | System connector | with ground wire
C2m = 150 000 pF | with ground line
C2m = 150 000 pF, connector, with ground wire
C2m = 150 000 pF, control line pluggable, no ground wire
C2m = 150.000 pF | System connector | with ground wire
C2m = 1500 pF | with ground wire
C2m = 1500 pF, connector, with ground wire
C2m = 2.200 pF | System connector | with ground wire
C2m = 22 000 pF | with ground line
C2m = 22 000 pF, control line pluggable, no ground wire
C2m = 22.000 pF | System connector | with ground wire
C2m = 2200 pF | with ground wire
C2m = 2200 pF, control line pluggable, no ground wire
C2m = 3.300 pF | with ground wire
C2m = 3.300 pF | System connector | with ground wire
C2m = 33 000 pF | with ground line
C2m = 33 000 pF, connector, with ground wire
C2m = 33 000 pF, control line pluggable, no ground wire
C2m = 33.000 pF | System connector | with ground wire
C2m = 330 pF | with ground wire
C2m = 330 pF | System connector | with ground wire
C2m = 330 pF, control line pluggable, no ground wire
C2m = 3300 pF, connector, with ground wire
C2m = 4.700 pF | System connector | with ground wire
C2m = 47 000 pF, control line pluggable, no ground wire
C2m = 47 000 pF, control line pluggable, no ground wire
C2m = 47 000pF, connector, with ground wire
C2m = 47.000 pF | System connector | with ground wire
C2m = 470 pF | System connector | with ground wire
C2m = 470 pF, control line pluggable, no ground wire
C2m = 4700 pF | with ground line
C2m = 4700 pF, control line pluggable, no ground wire
C2m = 5 000 pF | with ground line
C2m = 6.800 pF | System connector | with ground wire
C2m = 68 000 pF | with ground line
C2m = 68 000 pF, connector, with ground wire
C2m = 68 000 pF, control line pluggable, no ground wire
C2m = 68.000 pF | System connector | with ground wire
C2m = 680 pF | with ground line
C2m = 680 pF | System connector | with ground wire
C2m = 680 pF, control line pluggable, no ground wire
C2m = 6800 pF | with ground wire
C2m = 6800 pF, control line pluggable, no ground wire
C2m = 7 000 pF | with ground line
C2m = 8 000 pF, control line pluggable, no ground wire
Directional Split-Core Transducer for C-Cone Bushing
Directional Split-Core Transducer for SIEMENS-Bushing
CT for bushings, 1% deviation, directional, for measured value acquisition, for C-cone, set
CT for bushings, 1% deviation, directional, for measurement, for C-cone, set
CT for bushings, 1% deviation, directional, for measured value acquisition, for Siemens switchgears, set
CT for bushings, directional, for measured value acquisition, for C-cone, set
CT for bushings, directional, for measured value acquisition, for Siemens switchgears, set
Earth short-circuit indicator, flag + LED, wall-mounted
Earth short-circuit indicator, flag + LED, wall-mounted, low-bat
Fault indicator for overhead line
Fault indicator for overhead line | Connection: Bayonet
Fault indicator for overhead line | Connection: Ring eyelet
Fault indicator for overhead line with communication
Fault indicator for overhead line, earth fault detection by pulsation method | Connection: Bayonet
Fault indicator for overhead line, earth fault detection by pulsation method | Connection: Ring eyelet
Fault current and voltage indicator with partial discharge detection for underground networks up to 72 kV
Feeder Control Units for Distribution Stations
Feeder Control Units for distribution substations, with ModbusRTU (Slave)
Front side adjustment of the PD response threshold
For hotsticks with bayonet connector
For hotsticks with ring lug connector
For CAPDIS and capacitive sensors, with AK-Socket für adapter cable AK, RG58, 12 m, no broken lead detection
For CAPDIS and capacitive sensors, with AK-Socket für adapter cable AK, RG58, 3 m, without broken lead detection
For CAPDIS and capacitive sensors, with AK-Socket für adapter cable AK, RG58, length on request, 1 - 30 m
For CAPDIS and capacitive sensors, with AK-Socket für adapter cable AK, RG62, 6 m, without broken lead detection
For CAPDIS and capacitive sensors, with AK-Socket für adapter cable AK, RG58, 6 m, without broken lead detection
For CAPDIS coaxial cable sets
For mobile use
For phase comparison in larger switchgears
For direct connection to capacitive sensor (IKI-23 with LRM-Module)
For simple voltage absence testing
For Grid-Demonstrator
For Grid-Demonstrator, with watt residual current increase
For Grid-Demonstrator, simulation of high-voltage cable
For Grid-Demonstrator, simulation of partial discharge
For C-Rail mounting, with thread
For IKIs with bayonet connector
For IKIs with ring eyelet
for split-core CT, set 3 x 3 m
for split-core CT, set 3 x 3 m, in braided sleeving
for split-core CT, set 3 x 5 m
for split-core CT, set, length on request
for medium voltage connectors Nexans K158LR, for CAPDIS
for medium voltage connectors Nexans K4XX, for CAPDIS
for medium voltage connectors Nexans M430TB/G, for CAPDIS
for medium voltage connectors Nexans M480TB/G, for CAPDIS
for medium voltage connectors NKT CB for CAPDIS
for medium voltage connectors NKT CE24, for CAPDIS
for medium voltage connectors NKT EASW 20, for CAPDIS
for medium voltage connectors NKT SS, for CAPDIS
for medium voltage connectors Suedkabel SEHDT 23, for CAPDIS
for medium voltage connectors Suedkabel SEHDW 21, for CAPDIS
for medium voltage connectors Suedkabel SEIK, for CAPDIS
for medium voltage connectors Suedkabel SET, for CAPDIS
for medium voltage connectors Tyco ELB with test point, for CAPDIS
for medium voltage connectors Tyco RPIT, for CAPDIS
for medium voltage connectors Tyco RSES and RSSS, for CAPDIS
for medium voltage connectors Tyco RSES-64xx, for CAPDIS
for medium voltage connectors Tyco RSTI, for CAPDIS
for medium voltage connectors Tyco RSTI, for CAPDIS, without cover cap
for connectors by Pfisterer, for CAPDIS
For PSU-Hybrid 1.3 Ah
For PSU-Hybrid 12 Ah
For PSU-Hybrid 2.2 Ah
For PSU-Hybrid 3.4 Ah
For PSU-Hybrid 4.5 Ah
For PSU-Hybrid 7.2 Ah
For PSU-Hybrid 9 Ah
for summation transformers, 1 x 5 m
Device in housing, IP66, for CAPDIS-Sx
Device in housing, IP66, for IKI
Directional short-circuit and earth fault indicator, bistable contacts
Directional short-circuit and earth fault indicator, monostable wiper contacts
High values
HR/LRM adapter for CAP phase
IKI to CAPDIS-PI-RR4, screened, 0.3 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 0.5 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 1.5 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 1.5 m, 2 x system connector, decoupled
IKI to CAPDIS-PI-RR4, screened, 10 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 10 m, 2 x system connector, decoupled
IKI to CAPDIS-PI-RR4, screened, 3 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 3 m, 2 x system connector, decoupled
IKI to CAPDIS-PI-RR4, screened, 6 m, 2 x system connector
IKI to CAPDIS-PI-RR4, screened, 6 m, 2 x system connector, decoupled
IKI to CAPDIS, shielded, 0.25 m, 2 x system connector, decoupled
IKI to CAPDIS, shielded, 0.4 m, 2 x Sx blade plug to system connector
IKI to CAPDIS, shielded, 0.4 m, 2 x Sx blade plug to system connector, decoupled
IKI to CAPDIS, shielded, 0.4 m, 2 x system connector
IKI to CAPDIS, shielded, 0.4 m, 2 x system connector, 2x 90° tilted
IKI to CAPDIS, shielded, 0.4 m, 2 x system connector, decoupled
IKI to CAPDIS, 0.4 m, Sx blade plug to system plug
IKI to CAPDIS, 0.4 m, Sx blade plug to system plug, decoupled
IKI to CAPDIS, shielded, 1.5 m, 2 x Sx blade plug to system connector
IKI to CAPDIS, shielded, 1.5 m, 2 x Sx blade plug to system connector, decoupled
IKI to CAPDIS, shielded, 1.5 m, 2 x system connector
IKI to CAPDIS, shielded, 1.5 m, 2 x system connector , decoupled
IKI to CAPDIS, 1.5 m, Sx blade plug to system plug
IKI to CAPDIS, 1.5 m, Sx blade plug to system plug, decoupled
IKI to CAPDIS, shielded, 10 m, 2 x Sx blade plug to system connector
IKI to CAPDIS, shielded, 10 m, 2 x Sx blade plug to system connector, decoupled
IKI to CAPDIS, 2 m, Sx blade plug to system plug
IKI to CAPDIS, shielded, 3 m, 2 x Sx blade plug to system connector
IKI to CAPDIS, shielded, 3 m, 2 x Sx blade plug to system connector, decoupled
IKI to CAPDIS, shielded, 3 m, 2 x system connector
IKI to CAPDIS, shielded, 3 m, 2 x system connector , decoupled
IKI to CAPDIS, 3 m, Sx blade plug to system plug
IKI to CAPDIS, shielded, 6 m, 2 x Sx blade plug to system connector
IKI to CAPDIS, shielded, 6 m, 2 x Sx blade plug to system connector, decoupled
IKI to CAPDIS, shielded, 6 m, 2 x system connector
IKI-23 and CAPDIS-S2_55 (R2)
IKI-35_24V RF, Protection relay according to EN 60255, LCD and USB, 24V trigger, Compatibility with IKI-30 current sensors
IKI-50 to OAS, 0.4 m, Sx flat plug to system plug, double flat plug sleeve
IKI-50_1F R2 and CAPDIS-S2_55 (R2)
IKI-55 and CAPDIS-S2_55 (R2)
IKI system connector to wire end sleeves
Integrated Voltage Detecting Systems
Integrated Voltage Detecting Systems with Relay Contact
Integrated voltage detecting system with system plug
Cable set for PSU-Hybrid accumulators, 0.5 m
Directional Split-Core Transducer
Split-core CT, directional, for data acquisition, with cable tie, set
Capacitive coupling electrode for retrofits, 12 kV
Capacitive coupling electrode for retrofitting, 24 kV
Capacitive adaption module
Capacitive Voltage Detecting Systems
Capacitive Voltage Detecting Systems attachable to IKI-23
Capacitive Voltage Detecting Systems for high voltage
Capacitive Voltage Detecting Systems with Relay Contacts
Capacitive Voltage Detecting Systems with Relay Contacts for Protection Applications
Capacitive Voltage Detecting Systems with Relay Contacts for Protection Applications, with Partial Discharge Detection
Capacitive Voltage Detecting Systems with relay contacts, for high voltage
Capacitive Voltage Detecting Systems with Relay Contacts, with Partial Discharge Detection, for High Voltage
Capacitive Voltage Detecting Systems with Partial Discharge Detection
Capacitive Voltage Detecting Systems with Partial Discharge Detection, for High Voltage
Combined sensor U/I for air-insulated cable terminations
Combined sensor U/I for non.screened cable terminations
Compact motor control with minimized standby consumption
Compact motor controller with minimized standby consumption, low impedance inputs
Configuration software for IKI series
Short-circuit / earth short-circuit indicator
Short-circuit / earth short-circuit indicator, battery buffered, 1 relay output changeover contact
Short-circuit / earth short-circuit indicator, battery buffered, 2 relay outputs NC contact
Short-circuit / earth short-circuit indicator, battery buffered, 2 relay outputs N/O contact
Short circuit / earth fault indicator, battery buffered, 3 relay outputs NC contact and common root
Short-circuit / earth fault indicator, capacitor-buffered, auxiliary power 110 - 230 VAC, 1 relay output change-over contact
Short-circuit / earth fault indicator, capacitor-buffered, auxiliary power 110 - 230 VAC, 2 relay outputs NC contact
Short-circuit / earth fault indicator, capacitor-buffered, auxiliary power 110 - 230 VAC, 2 relay outputs N/O contact
Short-circuit / earth fault indicator, capacitor-buffered, auxiliary power 110 - 230 VAC, 3 relay outputs NC contact with common root
Short-circuit / earth fault indicator, capacitor-buffered, auxiliary power 110 - 230 VAC, 3 relay outputs normally open with common root
Length and connectors on request; 0.5 - 40 m
Length and connectors on request
Split-core CT, directional, set
Split-core CT, directional, for measured value acquisition, for unshielded ground cable terminations, set
Split-core CT, directional, for measured value acquisition, for unshielded ground cable terminations, Set of 3
Split-core CT, non-directional, for IKI-30, for C-cone bushings, for Siemens switchgears, set
Split-core CT, non-directional, for IKI-30, for C-cone bushings, set
Split-core CT, non-directional, for IKI-30, set
Mini-USB to USB
With cutout, 92 x 45 mm, high profile
With cutout, 92 x 45 mm, low profile
Medium values
Retrofittable VDIS for defective HR interfaces
Retrofittable VDIS for defective HR interfaces, 90° rotateable
Retrofittable VDIS for defective HR interfaces, with extended connectors for L2/ground 20 mm
Retrofittable VDIS for defective HR interfaces, connecting lines L1/L3 - length 300 mm
Retrofittable VDIS for HR interfaces
Retrofittable VDIS for LRM interfaces
Networkable Feeder Control Units for Distribution Substations
Networkable Feeder Control Units for Distribution Substations, Power-quality monitoring
Networkable Feeder Control Units for Distribution Substations, temperature compensated sensor input
Networkable Feeder Control Units for Distribution Substations, temperature compensated sensor input, Power-quality monitoring
Low values
Ohmic voltage sensor, 12 kV, 0.2 %, for retrofit, BNC connection
Ohmic voltage sensor, 12 kV, 0.2 %, for Nexans 400TB, K400TB, KAA4, Suedkabel SEHDT 23
Ohmic voltage sensor, 12 kV, 0.2 %, for NKT CB 24-630 M12
Resistive voltage sensor, 12 kV, 0.5 %, for retrofit, BNC connection
Ohmic voltage sensor, 12 kV, 0.5 %, for Nexans 400TB, K400TB, KAA4, Suedkabel SEHDT 23
Ohmic voltage sensor, 12 kV, 0.5 %, for NKT CB 24-630 M12
Ohmic voltage sensor, 12 kV, 0.5 %, IEEE version, for retrofit, BNC connection
Ohmic voltage sensor, 24 kV, 0.2 %, for retrofit, BNC connection
Ohmic voltage sensor, 24 kV, 0.2 %, for Nexans 400TB, K400TB, KAA4, Suedkabel SEHDT 23
Ohmic voltage sensor, 24 kV, 0.2 %, for NKT CB 24-630 M12 up to 300 mm² / NKT CB 36-1250 M16 up to 630 mm² bei 24 kV, Suedkabel SET 24
Ohmic voltage sensor, 24 kV, 0.2 %, for TE Connectivity: RSTI-58xx, RSTI-CC-58xx(coupling) RSTI-SA-58xx(Surge Arrestor) (asymmetrical)
Ohmic voltage sensor, 24 kV, 0.2 %, Nexans 430TB
Resistive voltage sensor, 24 kV, 0.5 %, for retrofit, BNC connection
Ohmic voltage sensor, 24 kV, 0.5 %, for Nexans 400TB, K400TB, KAA4, Suedkabel SEHDT 23
Ohmic voltage sensor, 24 kV, 0.5 %, for NKT CB 24-630 M12 up to 300 mm² / NKT CB 36-1250 M16 up to 630 mm² bei 24 kV, Suedkabel SET 24
Resistive voltage sensor, 24 kV, 0.5 %, for TE Connectivity: RSTI-58xx, RSTI-CC-58xx(coupling) RSTI-SA-58xx(Surge Arrestor) (asymmetrical)
Ohmic voltage sensor, 24 kV, 0.5 %, IEEE version, for retrofit, BNC connection
Ohmic voltage sensor, 24 kV, 0.5 %, Nexans 430TB
Resistive voltage sensor, 36 kV, 0.2 %, for retrofit, BNC connection
Resistive voltage sensor, 36 kV, 0.5 %, for retrofit, BNC connection
Ohmic voltage sensor, 36 kV, 0.5 %, IEEE version, for retrofit, BNC connection
PONLINE-Gateway
Primary Tester for Fault Indicators of IKI-Line
Series of split-core and bushing CTs, directional
Series of split-core and bushing CTs, directional, for measurement value acquisition
Series of split-core and bushing CTs, directional, for measurement value acquisition, high precision
Voltage monitoring module, pluggable on CAPDIS-Sx, from 52 kV
Voltage monitoring module, pluggable on CAPDIS-Sx, from 52 kV, incl. Modbus
Voltage monitoring module, pluggable on CAPDIS-Sx, up to 52 kV
Voltage monitoring module, pluggable on CAPDIS-Sx, up to 52 kV, incl. Modbus
Voltage sensor for retrofitting, 1-24 kV, for non-controlled end closures, for SF6 switchgears
Voltage sensor for retrofitting, 1-24 kV, for non-controlled end closures, for air-insulated switchgears
Voltage transducer, 110 V output, system cable 3m
Voltage transducer, without 4-20 mA output, without system cable
Voltage transducer, without 4-20 mA output, system cable 0.3 m
Voltage transducer, without 4-20 mA output, system cable 1.5 m
Voltage converter, system cable 3m
Voltage transformer replacement for resistive sensors
Voltage transformer replacement for resistive sensors, fg = 2 kHz
Voltage transformer replacement for resistive sensors, fg = 2 kHz, 0.3 %
Voltage transformer replacement for resistive sensors, fg = 2 kHz, for ABB (KEVA) and Zelisko sensors, input burden 200 kOhm, 0.3 %
Voltage transformer replacement for resistive sensors, fg = 2 kHz, for ABB (KEVA) and Zelisko sensors, load 200 kOhm
Voltage transformer replacement for resistive sensors, fg = 2 kHz, divider matching by exchangeable R2m module
Balanced core CT 60 x 314 mm
Balanced core CT, D = 130 mm
Balanced core CT, D = 160 mm
Insulators with tap, 12 kV, wrap-around strength A
Insulators with tap, 24 kV, transformation strength A
Insulators with tap, 36 kV, break strength A
Transformer Monitor, Protection Relay according to EN 60255
Transformer monitor, Protection Relay according to EN 60255, LCD and USB, 24V release
Transformer monitor, Protection Relay according to EN 60255, LCD and USB, 24V release, UL
Universal tester
Universal tester, 60 Hz, complete set
Universal tester, single unit
Universal tester, complete set
Universal telecontrol solution for transformer stations and redispatch 2.0
Universal telecontrol solution for transformer stations and Redispatch 2.0, 16 Inputs
Universal telecontrol solution for transformer stations and Redispatch 2.0, additional IOs
Universal fault indicator | directional | Modbus with integrated buffer
Universal fault indicator for intelligent distribution substations
Universal fault indicator for intelligent distribution substations, 2 feeder version
Universal fault indicator for intelligent distribution substations, 2 feeder version, precise voltage measurement
Universal fault indicator, directional
Universal fault indicator, directional, with Voltage Detecting Systems CAPDIS_top
Universal fault indicator, directional, with Voltage Detecting Systems CAPDIS_top, Modbus
Universal fault indicator, directional, Modbus
Universal Feeder Control Units, single-field monitoring, pulsation method, wiper mode, resistive and capacitive voltage measurement
Connecting line between CAPDIS-M and CAPDIS-4, 0.3 m
Connecting line between CAPDIS-M and CAPDIS-4, 0.3 m, flat ribbon cable
Connecting line between CAPDIS-M and CAPDIS-4, 1.5 m, flat ribbon cable
Connecting line between CAPDIS-M and CAPDIS-4, 1.5 m, for SxR4
Connecting line between CAPDIS-M and CAPDIS-4, 3m
Connecting line between CAPDIS-M and CAPDIS-4, 3 m, for SxR4
Connecting line between CAPDIS-M and CAPDIS-4, 3 m, with heat shrink tube
Connecting line between CAPDIS-M and CAPDIS-4, 5.5 m
Connecting line between CAPDIS-M and CAPDIS-4, 8 m
Extension for y-cables, 3 m, wire end sleeves
Extension for y-cables, 0.3 m
Extension for y-cables, 0.6 m
Extension for y-cables, 1.5 m
Extension for y-cables, 3 m
Extension for y-cables, 4.5 m
Low-maintenance UPS for transformer stations, capacitor-buffered, rechargeable battery
Low-maintenance UPS for transformer stations, capacitor-buffered, battery, for drive motors with high starting current
Maintenance-free capacitor buffer, 110 ... 230 V, 0.1 As
Maintenance-free capacitor buffer, 24 V output
Maintenance-free capacitor buffer, 24 V, 240 As
Accessory for CAPDIS R5
To connect ohmic sensors to IKI or CAPDIS, RG62, l=2m
To connect ohmic sensors to IKI or CAPDIS, RG62, l=6m
To connect ohmic voltage sensors to IKIs
For auxiliary voltage and relay connection
For mounting of KKEs at cable terminations
For easy retrofitting interfaces
For easy retrofitting interfaces, pluggable
For easy retrofitting, magnetic holder
For contacting non-standard sockets on capacitive interfaces
