CAPDIS-4

Voltage transducer, without 4-20 mA output, without system cable

Item number: 2500307_H007

Voltage amplifier can be used as a voltage transformer substitute. Together with the CAPDIS-M,... more

Product information "CAPDIS-4"

Voltage amplifier can be used as a voltage transformer substitute. Together with the CAPDIS-M, the CAPDIS-4 can use the CAPDIS-Sx series devices as capacitive voltage sensors, generating e.g. 3 x 100 VAC to replace three inductive voltage transformers.

The CAPDIS-4o amplifier provides an output voltage of 3 x 100 or 110 VAC /sqrt (3) in conjunction with three ohmic coupling electrodes. The amplifier can therefore be used as a substitute for three inductive voltage transformers.- economical alternative to feeder voltage transformers
- minimal space requirement, no additional measuring compartment needed
- no disassembly required for surge voltage tests
- no risk of ferroresonance
- 4 voltage outputs 100 VAC, 0.5 VA per channel
- Without system cable to CAPDIS-M

Close menu

Device data
Article number	2500307_H007
Product designation	CAPDIS-4 Voltage Transducer \| without 4-20 mA output \| without system cable

Output power per channel	0.5 VA
Maximum output voltage	100 V
Summation voltage	✓
Accuracy class amplitude	3
Accuracy class of phase angle	Applies in each case depending on the used C2m module of the Capdis-Sx+: Capdis-S1+R3/R4: 1,500 pF< C2m < 3,300pF: Class 6P (±4°) C2m > 3. 300pF: Class 3P (±2°) Capdis-S2+R3: C2m > 15,000 pF Class 6P (±4°) Capdis-S2+R4: C2m < 3. 300 pF Class 6P (±4°) C2m > 3,300pF: Class 3P (±2°) Capdis-Pi-RR3/RR4: 1,500 pF< C2m < 3. 300pF: Class 6P (±4°) C2m > 3,300pF: Class 3P (±2°) Note: Capdis-Pi-HR is not suitable for use with Capdis-M.
Cut-off frequency fg	2500 Hz
Maximum input voltage	1.5 V
System cable	No
4..20 mA interface	-
Dimensions
Case height x width x depth	130 x 175 x 49 mm
Mounting	DIN rail
Installation type	C-Rail mounting
Operating conditions
Operating temperature	-20°C ... 55°C
Storage temperature	-25°C ... 70°C
Protection class	IP40

Summation voltage	✓

Auxiliary power supply	24-240V AC/DC
Power consumption	16 VA
CT-supplied	-
Capacitor buffer	-

Mounting	DIN rail

Close menu

Datasheet
Manual (Registered users)