Ponline Butler-RTU

Ponline Butler-RTU

Universal telecontrol solution for transformer stations and redispatch 2.0

Item number: 2503400_H001
The PONLINE Butler-RTU connects distribution network stations very easily and cost-effectively to... more
Product information "Ponline Butler-RTU"
The PONLINE Butler-RTU connects distribution network stations very easily and cost-effectively to higher-level telecontrol levels. Via secure connections the data can be transmitted e.g. via IEC 60870-5-104 or MQTT. An integrated UPS module buffers data of the connected devices in case of power failure.

Multitalent in communication and encryption

Control station protocols such as IEC 60870-5-104 or MQTT are supported, encryption is via VPN, openVPN or IPSec.

Fault and measured value acquisition medium voltage

The PONLINE Butler-RTU can be ideally used in conjunction with the IKI-23 or IKI-50 series. In addition, further information from the distribution network station can be processed via digital inputs and outputs.

Easy remote control parameterization

The data points can be easily configured or can be pre-configured at the factory.

Universal connection to SCADA

Visualization can be done via existing control systems or via our PONLINE-Connect.
Device data
Article number2503400_H001
Product designationPonline Butler-RTU Universal remote control solution for transformer stations and Redispatch 2.0
Dimensions and installation instructions
Case height x width x depth300 x 250 x 150 mm
Installation typeWall mounting
Housing materialMetal
Operating conditions
Operating temperature-25°C ... 65°C
Storage temperature-25°C ... 60°C
Protection classIP65
Interfaces and communication
Modbus RTU Master
GSM modem (2G, 3G, 4G LTE)
SIM card formatMicro / Nano
IEC 60870-5-104 Slave
LAN connection
Transmission type Measured values and error messagesSpontaneous, Cyclic
Digital Inputs0
Signal outputs0
Power supply
Auxiliary power supply100 … 240 V AC (24 - 28 V DC auf Anfrage)
Capacitor buffer
Buffer time of capacitor bufferca. 5 Minuten